🍎

Download Daylight for Mac

Send documents to Reader, look after your DC-1, and move files and copies between it and your Mac. Plug it in once, and from then on it works over Wi-Fi.

☀️

Daylight for Mac

Install this app on your Mac to send documents to Reader and use your DC-1 from your desk.

🍎

macOS

Apple Silicon and Intel · macOS 14 Sonoma or later

Download

If that link opens the support home page instead of downloading, use the versioned file: Daylight-for-Mac-1.1.2.dmg.

MAC DOWNLOAD

🍎

Step 1 Click Download above, then open the .dmg file.

Step 2 Drag Daylight for Mac into your Applications folder. If you open it straight from the disk image or from Downloads, it offers to move itself there: click Move to Applications.

Step 3 Double-click Daylight for Mac in Applications. macOS asks whether to open an app downloaded from the internet: click Open.

What you need

  • A Mac with macOS 14 Sonoma or later, Apple Silicon or Intel
  • A Daylight DC-1 and a USB-C cable that carries data
  • A Daylight account (the one your tablet is signed in to)
ℹ️

Send to Reader needs a newer Reader on your DC-1 (2026.09.24 or later), which comes in a later tablet update. Everything else on this page works on every DC-1 today.

New in Daylight for Mac 1.1.2

  • Wi-Fi without an IP address. Daylight finds your tablet on the same Wi-Fi network by itself. Click Connect, or Pair and type the six digits your Daylight shows. Typing an address is still there, under More.
  • Plug in and go. A new install finds a Daylight on the USB-C cable straight away. The same tablet on the cable and on Wi-Fi shows once, not twice.
  • Make a Daylight account here. Sign in or Create a Daylight account, in the app or in your browser.
  • Updates by themselves. Daylight for Mac installs updates on its own. You can turn this off in Settings.
  • Beam. Many small files send about twice as fast. Stop and Stop all end a send, and a cable blip waits and tries again.
  • The screen window. A dropped file goes to the tablet shown. An asleep tablet says so, and a click wakes it.

First-time setup

The first time you open the app, a short welcome walks you through these steps. You can see it again any time from Help › Show Welcome.

  1. Sign in with your Daylight account: the same email and password your tablet uses. No account yet? Click Create a Daylight account in the app.
  2. Turn on USB debugging on your DC-1 (once per tablet): open Settings › About tablet, scroll to the very bottom and tap Build number seven times. Then go to Settings › System › Developer options and turn on USB debugging.
  3. Plug in your DC-1 with a USB-C cable and unlock it. When it asks "Allow USB debugging?", tick Always allow from this computer and tap Allow. This lets this Mac read and change files and settings on your DC-1, so only allow Macs you own.

After that it can work over Wi-Fi: when the tablet asks "Allow wireless debugging on this network?", tick Always allow on this network and tap Allow. Once the app says you can unplug the cable, unplug it.

When macOS asks whether Daylight for Mac may find devices on your local network, click Allow, or Wi-Fi can't find your DC-1.

The app has its own window and a ☀️ sun in the menu bar near the clock. Closing the window keeps the sun, so the most common controls are always one click away.

What it does

Send to Reader and the Library

Drop a PDF, a Markdown or a text file on Send to Reader (⌘3), or paste a web address into Web page and click Clip to keep just the article. Click Send to Reader and it appears in Reader on every Daylight signed in to your account, usually within half a minute.

Your Daylight from the desk

Devices (⌘1) shows your DC-1 with its battery, warmth and brightness. Set Warmth and Brightness, Wake or Sleep the screen, and Take a screenshot (⇧⌘S): it lands in Pictures › Daylight › Screenshots.

Wi-Fi without the cable

Plug in once while the app is open and you are signed in, and from then on your DC-1 connects over Wi-Fi on the same network. It reconnects by itself after a drop or a restart; wake the tablet if it was asleep.

Files

Files (⌘5) shows your tablet's storage the way Finder shows a drive. Drag files in and out, make folders, rename, and press Space for Quick Look.

Clipboard

Turn on the shared clipboard in Clipboard (⌘6) to copy on your Mac and paste on your DC-1, and back. It is off until you turn it on, and carries plain text only. Password-manager copies are never sent.

Go outside, Go to bed, Restore the light

Go outside turns the backlight off so the screen reads by daylight. Go to bed sets the backlight to 25% and the warmth to full amber. Restore the light puts everything back exactly as it was.

Mark up

Drop a PDF on Mark up (⌘4) and it opens on your DC-1. Write on it with the pen and tap Done: the marked-up copy comes back to your Mac, and your original PDF is never changed.

Mirror your Mac

Mirror your Mac to your Daylight opens Daylight Link, our separate app that shows your Mac's screen on your DC-1. Then open View on the tablet to connect. See Download Daylight LinkDownload Daylight Link.

Show your Daylight on this Mac

Show your Daylight on this Mac opens a window with your tablet's screen in it, over the cable or Wi-Fi. Click and drag in it as a finger would, and type.

Beam

Drop files, pictures, text or a link on Beam (⌘7) and they land in Download › Beam on your DC-1. Turn on Beam from your Daylight, and what you share to Beam to computer on the tablet lands in Downloads › Daylight Beam on your Mac.

Notes

Notes (⌘8) shows what you write in Note Overlay: every notebook and page. Search them, and save a page as a PDF or a picture.

Updates and Help

The app keeps itself up to date. To check now, choose Daylight for Mac › Check for Updates…. Help is always in the Help menu (⌘?).

Removing the app

Settings › About › Remove Daylight for Mac… lists everything it will remove before anything happens. Then drag the app to the Trash. Your mark-ups, screenshots and anything you copied from the tablet are never touched.

Troubleshooting

‣
I can't sign in: "That email and password do not match".
‣
The app can't find my DC-1.
‣
My DC-1 doesn't connect over Wi-Fi.
‣
Do I still need Daylight Link?

Need help?

Email hello@daylightcomputer.com. It helps to include the app's diagnostics: open Settings › About and click Copy diagnostics, then paste it into your email. Diagnostics never include passwords, documents or clipboard text.